|
Micro
Plasma Welding Machines
|
|
- Fully indigenous for the first time in
India.
- Complete inverter based.
- With built-in Pilot arcing system.
- PLL based closed loopsystem for highly
stable arc.
- Full fledged pulsing facility.
- Milli second square wave correction technique
for fast correction of welding current irrespective of arc
length or input voltage variation.
|
Specifications:
| SELECTABLE OCV |
70
Volts for Argon , 110 volts for Helium. |
| CURRENT RANGE |
0.5A
to 50A in steps of 0.1A |
| PULSE ON TIME |
10
to 90 % |
| PULSE FREQUENCY |
1
to 100 hertz in steps of 1 hertz. |
| PRE & POST FLOW |
1
to 10 sec |
| UP SLOPE TIME |
1
to 10 sec |
| DOWN SLOPE TIME |
1
to 10 sec |
- Machine can sustain
an arc length of 10mm length at 10 Amps current output effectively,
eliminating the need for AVC.
- The machine is
capable of welding metal sheet of capability from 10 microns to
3mm thickness.
- A manual torch
and a machine torch available for manual or mechanised operation.
- The machine is
fully programmable ( with built in welding cycle timer) in the
auto mode.
Digital version
available on demand with complete computer interfacing for welding
including turntable for welding round cross sections.
Welding
Data -
Keyhole Plasma welding of 10mm plates
Micro plasma welding
|
