Arcraft Plasma Equipment (India) Pvt. Ltd.
Air Plasma Machines - Air Plasma Cutting Machines
Description: Consist of Power source with controls, Water recirculating system if required and a well designed Torch. The basic principle is that the arc formed between the electrode and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emanating from the nozzle. The temperature of the plasma is in excess of 20 000°C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.
 
Applications: Can cut all electrically conductive metals like S.S, C.S, Copper, Aluminium, Inconel, Titanium etc.
Cutting Machines |Inverterised
  • Optimised design of fully copper wound oil cooled transformer with high quality CRGO laminations to ensure low power consumption at 100% duty cycle.
  • Step controlled power for high capacity machine for extended power saving.
  • High open circuit voltage to accommodate easy arc striking. Fully protected power source against voltage fluctuation & overload added with complete safety interlocking for torch protection against air and water failure.
  • Easy to operate and maintain 90° torch head for operator's convenience.
  • Highly improved air swirling offers higher cutting capacity at low power output.
  • Contemporary torch design guarantees long life of consumables viz. electrode and nozzle.
  • Almost vertical, dross free cuts with minimum kerf width.
  • Standard Torch cable length of 7 meters with option to extend upto 30 meters.
  • Robust design with powder coated chassis ensures long life in site conditions also.

SINGLE STEP MODELS : ARC CUT 10 TO ARC CUT 50

MODEL : ARC CUT
10
16
25
30
40
50
Cutting Capacity
Clean Cut mm in MS/SS
6
10
16
25
32
40
Parting Cut mm in MS/SS
Clean Cut mm in AL/CU
10
16
25
32
40
50
Torch cooling
Air
Air
Air
Air
Air
Air
compressor specs
Air Pressure - Kg./Cm2
Flow - LPM
9
340
9
340
11
560
11
560
11
560
11
560
Input : Volts/Phase/Freq
415/3/50
415/3/50
415/3/50
415/3/50
415/3/50
415/3/50
Max. Input KVA
9
12
17
27
31
38
Open circuit voltage
320
320
320
320
320
320
Output Current - Amps.
30
40
60
80
100
120
Duty Cycle %
60
100
100
100
100
100
Transformer Cooling
Air
Oil
Oil
Oil
Oil
Oil
Dimensions -
mm L x W x H
510 x 510 x 600
915 x 560 x 820
915 x 560 x 820
915 x 560 x 820
915 x 560 x 820
915 x 560 x 820
Weight Kgs.
70
140
180
210
225
250

Technical Data - Getting the best of your plasma cutting consumables

Home | About Us | Products | School of Welding | Welding Automation | Welding Data |
|Contact Us | Related Links
Manufacturers of Plasma torches & consumables - Air Plasma Machines - Air Plasma Cutting Machines, Inverterised Air Plasma Machines

Website Managed By AV Interactive Pvt. Ltd.